Item
Contents
The WC7520
Wireless Controller contains the accompanying:
• Wireless
Controller
• Ethernet
link
• Power rope
• Rack
mounting equipment
•
Installation Guide
• Resource
CD
To start
with, Set Up the WC7520 Wireless
Controller
1. Interface
the WC7520 Wireless Controller To Your Computer
a. Unload
the crate and confirm the substance.
b. Design a
PC with a static IP address of 192.168.0.210 and 255.255.255.0 as the Subnet
Mask in the mywifiext.net settings.
c. Associate
the controller to the PC by means of the system or legitimately to one of the
controller's ports.
d. Associate
the power line from the controller to an AC electrical plug.
e. Check the
lights on the facade of the controller:
2. Design
Basic Settings
a. Design
the WC7520 Ethernet port for LAN get to. Interface with the
WC7520
Wireless Controller by opening your program and entering
http://mywifiext.net
in the location field.
A login
window will show for the mywifiext panel.
b. Whenever
incited, enter administrator for the client name and secret phrase for the
secret phrase, both in lower case letters.
c. The
WC7520 Wireless Controller
UI will
show.
d. Enter a
name for the controller and the nation code where the controller will be
utilized.
e. Enter the
IP address and VLAN of the controller (Configuration > System> IP/VLAN)
in light of your system also, click Apply. On the off chance that the
controller is designed as VLAN, allude to the System Organization Manual.
Certain setup prerequisites must be met for the controller to find passageways
if the controller is in a labeled VLAN.
f. Design
your PC to the equivalent subnet as the controller and login to the controller
utilizing the controller's new IP address.
g. Setup the
remote SSIDs and their security settings in the mywifiext.net set up(Configuration
> Profile > Fundamental). Up to 8 SSID's can be setup from the
fundamental settings page. In the event that your setup requires passages to
utilize totally unique SSIDs, at that point make extra gatherings from Advanced
settings and make the SSID's under those gatherings. You can allocate the
distinctive gatherings to various passages from the WLAN Network page. Allude
to the segment on Advanced gatherings in the Programming Administration Manual.
h. When the
passages are changed over from Standalone mode to oversaw mode in the
mywifiext.net they default to DHCP to get an IP address. There is no static IP
setting.
So before
you add passages to the oversaw rundown, guarantee there is a DHCP server in
the mywifiext.net system and the passages have arrange availability to it.
I. On the
off chance that there is no DHCP server in the system, setup a DHCP server in
the controller to furnish the passages with IP addresses.
Note: When
passageways are associated with the controller, they will promptly stack the
design from the controller. It is vital to setup SSID and security to avert un
secure access to your system before you associate passages to the controller.
Comments
Post a Comment