Utilizing a mywifiext system with two switches bodes well in a private
venture when you come up short on ports on a first switch to associate PCs or
gadgets to. Setting up the two switches is a genuinely clear process and should
just take around 60 minutes.
1. Append the coaxial link coming into
the building, which gives Web access, to your link modem's coaxial connector.
This is fundamental if your modem isn't as of now introduced. In the event that
it is as of now set up, proceed to stage 3. Connect the power connector to the
modem and turn it on.
2. Call your Network access supplier and
furnish them with the serial number and ID of the mywifiext.net switch, whenever incited, all together for the modem
to be initiated.
3. Associate one side of an Ethernet link
to the Ethernet port on the modem. Interface the opposite side of the Ethernet
link to the WAN or modem port on the principal switch.
4. Reset the switch by squeezing and
holding the reset catch with a paper cut for thirty seconds. It is simpler to
begin with the default mywifiext.net settings
for the switch so you can pursue the means to set it up in the switch's
documentation.
5. Power on the principal switch. Append
an Ethernet link from one of the LAN ports on the switch to the Ethernet port
on your PC.
6. Open your Internet browser on your PC
and enter the default IP address of the switch. This can be found in its mywifiext.net documentation. Pursue the
means to sign in and set up your switch from its documentation.
7. Reset the second switch as you did
beforehand with the first by squeezing and holding the reset catch for thirty
seconds. Append an Ethernet line from a LAN port on the principal switch to the
WAN or modem port on the second switch.
8. Power on the switch. Append your PC to
a LAN port on the second switch utilizing an Ethernet link.
9. Open your Internet browser and go to
the IP address of the second switch. Pursue any means to get done with setting
it up as found in its documentation.
Comments
Post a Comment