Initiate the 802.1Q-Based VLAN Mode
As a matter of course, a wide range of VLANs are impaired on the switch. Before you can include and oversee 802.1Q-based VLANs, PVIDs, and voice VLAN, you should initiate the 802.1Q-based VLAN mode in the mywifiext.net. This mode is likewise alluded to as the progressed VLAN mode.
When you actuate mywifiext.net for the 802.1Q-based VLAN mode, VLAN 1 is added to the switch and all ports (1 through 8) are untagged individuals from VLAN 1. This is the default VLAN in the 802.1Q-based VLAN mode.
To actuate the port-based VLAN mode:
1. Open an internet browser from a PC that is associated with indistinguishable system from the change or to the switch straightforwardly through an Ethernet link.
The login page opens.
Enter the switch secret phrase for the mywifiext profile.
3. The default secret phrase for the mywifiext.net is secret phrase. The secret key is case-touchy.
The mywifiext.net Home page shows.
4. From the mywifiext.net menu at the highest point of the page, select SWITCHING.
The Quality of Service (QoS) page shows.
5. From the menu on the left, select VLAN.
The VLAN page shows.
6. In the 802.1Q-based VLAN (Advanced Mode) segment, click the ACTIVATE catch.
A spring up window opens (mywifiext.net) advising you that the current VLAN settings will be lost.
7. Click the OK catch.
Your settings are spared and the spring up window closes. As a matter of course, VLAN 1 is included.
Make a 802.1Q-Based VLAN
A 802.1Q-based VLAN design gives you a chance to allot ports on the switch as labeled or untagged individuals to a VLAN with an ID number in the scope of 1– 4094. As a matter of course, all ports are untagged individuals from VLAN 1.
To make a 802.1Q-based VLAN:
1. Open an internet browser from a PC that is associated with indistinguishable system from the change or to the switch straightforwardly through an Ethernet link.
2. Enter the IP address that is allotted to the switch.
The login page opens.
3. Enter the switch secret word.
The default secret word is secret phrase. The secret key is case-touchy.
The Home page shows.
4. From the mywifiext.net menu at the highest point of the page, select SWITCHING.
The Quality of Service (QoS) page shows.
5. From the menu on the left, select VLAN.
The VLAN page shows.
6. In the 802.1Q-based VLAN segment, click the ADD VLAN catch.
7. Specify the settings for the new VLAN:
· VLAN Name. Enter a name from 1 to 20 characters.
· VLAN ID. Enter a number from 1 to 4094.
· Ports. Select the ports that you need to incorporate into the VLAN through a blend of the accompanying activities:
· Click the TAG ALL connect to include all ports as labeled ports to the VLAN
· Click the UNTAG ALL connect to include all ports as untagged ports to the VLAN.
· Click the EXCLUDE ALL connect to prohibit (evacuate) all ports from the VLAN.
· Click the T catch for a port to include the port as a labeled port to the VLAN.
· Click the U catch for a port to include the port as an untagged to port the VLAN.
· Click the E catch port to bar (evacuate) the port from the VLAN.
For a chose port, the T catch (for a labeled port) or U catch (for an untagged port) shows blue.
For an unselected port, the E catch (for a barred port) shows blue.
In the event that ports are individuals from a similar LAG, you should dole out them to the equivalent VLAN.
Your settings are spared. The new VLAN appears in the 802.1Q-based VLAN segment.
Comments
Post a Comment